HAMEG HM8130 - Programmable Function Generator

The HAMEG HM8130 is a programmable function generator designed to generate various types of signals with high accuracy and stability.

Frequency Characteristics

• Frequency range: 10 μHz to 10 MHz.
• Resolution: 5 digits, minimum step 10 μHz.
• Accuracy: ±(1 digit + 5 μHz).
  
  

Signal Types and Parameters

Sine Wave

• Frequency range: 10 μHz – 10 MHz.
• Amplitude: 0 – 20 V peak-to-peak (no load).
• Distortion: up to 500 kHz: < 0.5%; 500 kHz – 3 MHz: < 1%; 3 MHz – 10 MHz: < 3%.
  
  

Square Wave

• Frequency range: 10 μHz – 10 MHz.
• Amplitude: 0 – 20 V peak-to-peak (no load).
• Rise/Fall time: < 10 ns.
• Overshoot: < 5% (for Vout ≥ 200 mV).
• Symmetry: 50% ± (5% + 10 ns).
  
  

Pulse Signal

• Frequency range: 10 μHz – 5 MHz.
• Amplitude: 0...+10 V and 0...-10 V.
• Rise/Fall time: < 10 ns.
• Pulse width: from 100 ns to 80 s.
• Duty cycle: max. 80%.
  
  

Other Signals

• Ramp Signal: 10 μHz – 500 kHz, linearity better than 1%.
• Triangle Wave: 10 μHz – 2 MHz, linearity better than 1%.
• Arbitrary Wave: 10 μHz – 100 kHz, resolution: 10-bit (X), 12-bit (Y), sampling rate 40 MS/s.
  
  

Inputs and Outputs

Inputs

• Gate/Trigger: BNC connector, impedance 5 kΩ || 100 pF, protection up to ±30 V.
• AM-IN: BNC connector, impedance 10 kΩ, protection up to ±30 V.
  
  

Outputs

• Signal Output: BNC connector, short-circuit protected; external voltage max. ±15 V, impedance 50 Ω.
• Output Voltage:
  • Range 1: 2.1 – 20 V peak-to-peak (no load).
  • Range 2: 0.21 – 2.0 V peak-to-peak (no load).
  • Range 3: 20 – 200 mV peak-to-peak (no load).
• Resolution: 100 mV (Range 1), 10 mV (Range 2), 1 mV (Range 3).
  
  

Additional Features

Internal Sweep

• Selectable start and stop frequencies.
• Sweep for all signal types.
• Sweep time: from 20 ms to 100 s, linear or triggered mode.
  
  

Amplitude Modulation

• Modulation via external signal.
• Modulation depth: 0 – 100%.
• Bandwidth: DC – 20 kHz (-3 dB).
  
  

Gate (Asynchronous)

• On/Off modulation via external TTL signal.
• Delay time: < 150 ns.
• Input signal: TTL.
  
  

Trigger (Synchronous)

• Start of one signal period via external signal or interface.
• Resolution: 1 period.